| 5) The VFD will be installed in an electrical room, on a hospital surgical floor. What would be a key consideration in application engineering? |
| 7) A drive specification includes the capability of starting from a remote switch, and the keypad. The drive option referred to is... |
| 9) A conveyor sometimes starts with a full load of product on it. A vfd should be sized according to the motor full load amps, and what other rating? |
| 2) The drive will be mounted in a dry, dusty environment. What NEMA enclosure is recommended? |
| 4) When installing a drive in an enclosure, what key information about the drive, should you know? |
| 6) The drive is being installed on an existing motor in a roof mounted air handling unit. Which choice below is not a significant factor in this application? |
| 8) A variable frequency drive is required for a machine where control of motor speed and torque are critical. What should be the drive operation mode? |
| 10) The drive manufacturer specifies the maximum distance of lead wires to the motor is 100 feet. What are they concerned about? |